Newlands Bridge Project

Leca LWA was considered to be one of the ideal materials, as it only weighs a quarter of the normal soils.



Leca LWA was considered to be one of the ideal materials, as it only weighs a quarter of the normal soils.

Troubled Bridge

 

The Newland Bridge was constructed in 1992.

Newland Bridge carries the A645 link road over the  River Aire and forms part of the Drax link road between Goole and the Drax Power Station.

After the bridge and approach embankments were built, a number of defects developed in the structure and the road pavement. The approach embankments had settled substantially. Due to the excessive settlement of (up to 750 mm), movement joints were closed, bearings were distressed, and cracking of the abutment patching was observed.

Depth

“The depth of excavation required to achieve the required decrease of effective overburden pressure depended on the unit weight of the lightweight fill material to be used. Leca® LWA 10-20mm was selected as a lightweight fill.” Explains Sangmin Lee, Senior Geotechnical Engineer at Coffey Geotechnics.

 

Ideal Material.

Sangmin Lee, Senior Geotechnical Engineer at Coffey Geotechnics says that “Leca® LWA was considered to be one of the ideal materials, as it only weighs a quarter of the normal soils. It also has an advantage in construction, as it is similar to granular materials and is easy to handle.”

Job Done

Since the completion of the remedial works, there have been no signs of bridge movement and no embankment settlement has been reported. Leca® LWA provided the essential ingredient in resolving a serious bridge engineering issue.